Engine Mods

Ok, the laundry list:

On the Heads -  Port & Polished intake & exhaust ports, 1.7 to 1 ratio Full roller rocker arms, Oversized stainless intake valves from SBC, LS1 Beehive Valve springs - good to 6800 rpm Redline, Comp Cams hardened performance pushrods.

In the Block - Custom ground Camshaft from Delta Cams - .500 lift, Piston sleeves bored .040 over, & Northstar Pistons for increases compression ratio.

Extras - Ported Exhaust Manifolds, Allante Intake = super flow, and MSD ignition.

Heads

Intake

Pistons & Camshaft

Crankshaft

Engine tear down

Engine Assembly

BACK

Restoration / Modifications Page

 HOME PAGE